Cleaning and Polishing a Marble Floor in Kettering

Last year I was called to look at Polished Marble floor at a house in the small village of Old in Northamptonshire which is situated between Kettering and Northampton. The Marble floor was reasonably large at 25m2, and the main problem was the Marble had lost most of its shine, becoming dull and lifeless over time, additionally the grout which was once white had darkened with ground in dirt,

Marble Tiled Floor Before Grout Cleaning and Polishing

If you want the look of a highly polished floor then it will need regular polishing to keep its appearance, in fact Tile Doctor provide a “Maintenance Plan” service for this purpose. How often you need a repolish really depends on how much the floor is used and for a busy high traffic area such as this kitchen diner it may be necessary to have two visits a year.

In this case the Marble needed a lot more than a repolish, my client was unhappy with the stained grout lines and the tiles really needed stripping and resealing to bring the colour back to somewhere near its original. After surveying the floor, I was able to confirm what needed to be done and gave them a price for the work which they were happy to accept.

Cleaning and Polishing a Marble Tiled Kitchen Diner Floor

To get the grout clean and give remove grit etc from the floor before polishing I gave it an initial clean using a medium dilution of Tile Doctor Pro-Clean. This is a professional Tile and Grout cleaning product which is applied to the grout, left to soak in for ten minutes and then scrubbed into the grout line by hand. The soil is then rinsed off with water and then extracted with a wet vacuum.

To bring up the polished appearance of the Marble tiles I used a set of four 17” diamond encrusted burnishing pads which have different levels of grit. The pads are applied to the Marble tiles in sequence using a floor buffer and a small amount of water for lubrication. I started with a coarse pad, before moving on to a medium pad, then a fine pad on the first day, working in small sections of around 4 – 5sqm. The floor is given a thorough rinse between each pad to remove any excess residue generated from the burnishing process. The soil was then extracted using a wet vacuum to keep the mess to a minimum.

Sealing a Marble Tiled Kitchen Diner Floor

The floor was left to dry overnight, and I returned the next day. I carried on the process using the very fine burnishing pad to achieve a high shine finish. This pad is applied dry to the floor using only a little water sprayed onto the tile. It brings up the final polish on the tiles and leaves the floor dry so it can be sealed afterwards.

To seal I applied a single coat of Tile Doctor Ultra-Seal which is a premium impregnating sealer that soaks into the pores of the stone protecting it from within. It’s a natural look sealer and by this, I mean it doesn’t alter the natural look of the stone and is almost invisible. The area was dried with a fan for one hour and then I checked the performance of the sealer by carrying out a water repellence test. The result of this test will let me know if a second coat of sealer may be needed.

Marble Tiled Floor After Grout Cleaning and Polishing

Once complete the grout was white again and the Marble tiles had a deep shine to them. My client was very happy with the results of my work and took the time to leave the following comment on the Tile Doctor feedback system.

Marble Polishing and Grout Cleaning Testimonial Old Village

For aftercare cleaning I recommended Tile Doctor Stone Soap which will keep the floor clean and help maintain the lustre. I also I let them know about our maintenance program which involves popping back for a couple of hours once a year to give the floor a polish with a very fine 3000-grit burnishing pad and top up the sealer.

Marble Tiled Floor After Grout Cleaning and Polishing

 

Source: Kettering Tile and Stone Cleaning and Renovation Service

Written by

Comments are closed.